Star | SR38 TYPE A & B | zurück | |||||||||||||||||||
|
|||||||||||||||||||||
Grundhalter + KM-Leiste Baseholder + cooling manifold |
GWS-Art.-Nr. | Information | Notiz | ||||||||||||||||||
Grundhalter 5-fach base holder 5-fold |
AD212008 | links / left | Setup1 / 2 | ||||||||||||||||||
Kuehlmittelleiste 5-fach cooling manifold 5-fold |
B212008001 | 2x
G1/8 Eingang, P1/P2 regelbar pro Station 2x G1/8 input , P1/P2 adjustable per station |
|||||||||||||||||||
Wechselhalter change holder |
|||||||||||||||||||||
Schaft 16 x 16 shank 16 x 16 |
BA212001.01 | Kuehlung
in Shaft + 3x Duese (M3) cooling in shaft + 3x jets (M3) |
|||||||||||||||||||
Schaft 16 x 16 shank 16 x 16 |
BA212001.02 | Kuehlung
in Shaft + Rohr cooling in shaft + nozzle |
|||||||||||||||||||
Schaft 1/2" x 1/2" shank 1/2" x 1/2" |
BA212001.03 | Kuehlung
in Shaft + 3x Duese (M3) cooling in shaft + 3x jets (M3) |
|||||||||||||||||||
Schaft 1/2" x 1/2" shank 1/2" x 1/2" |
BA212001.04 | Kuehlung
in Shaft + Rohr cooling in shaft + nozzle |
|||||||||||||||||||
Schaft 20 x 20 shank 20 x 20 |
BA212003.01 | Kuehlung
in Shaft + 3x Duese (M3) cooling in shaft + 3x jets (M3) |
|||||||||||||||||||
Schaft 20 x 20 shank 20 x 20 |
BA212003.02 | Kuehlung
in Shaft + Rohr cooling in shaft + nozzle |
|||||||||||||||||||
Schaft 20 x 20 shank 20 x 20 |
BA212003.03 | Kuehlung
in Shaft + Rohr ,Sonderdeckel kurz muss auf Abstechposition eingesetzt werden cooling in shaft + nozzle, specialcover short must be used on the parting off position |
|||||||||||||||||||
Bohrarm base holder drillblock |
Setup 2 Kundenbezogen / customized | ||||||||||||||||||||
Grundhalter/ base holder | AE211002 | ||||||||||||||||||||
Wechselhalter /change holder | FE211002 | 6 Bohrungen = 1xØ20mm 2xØ22mm 2xØ32mm | Setup 1 | ||||||||||||||||||
Wechselhalter /change holder | FE211003 | 5 Bohrungen = 1xØ20mm 2xØ22mm 2xØ32mm | Setup 2 | ||||||||||||||||||
Anbauteile optional component |
|||||||||||||||||||||
Werkzeugsicherung | B72007003 | ||||||||||||||||||||
Voreinstellen pre setting |
|||||||||||||||||||||
GWS-Voreinstellvorrichtung GWS presetting device |
|||||||||||||||||||||
einfach/ one position | VA212002.01 | X-axis = 26mm (Ausspannlaenge / clamping length) | |||||||||||||||||||
einfach/ one position | VA212002.02 | X-axis = 20mm (Ausspannlaenge / clamping length) | |||||||||||||||||||
GWS-Wechseladapter GWS-changeholder |
VMB212001 | mit Eichkante / with reference egde | |||||||||||||||||||